Prov 233

From ITS Wiki - Information Technology Services - University of Rhode Island

Jump to: navigation, search
Click to Enlarge

Location

Shepard Building, Second Floor, Rm 233

Capacity

Seating Capacity: 62

Contact

For additional information, please contact:
Classroom Media Assistance
Prov Room 327
401-277-5173
cmaprov@etal.uri.edu

To reserve this room, contact:

Kathy Thorsen
401-277-5030

Or fill out a [Space Request Form]

Light Switches

Light switches are located on the wall concurrent with the door.

Internet Access

Ethernet

All rooms have wireless internet access. If you have not used wireless access in the past, please be sure to test out your laptop before class starts. Some manufacturers have special programs or utilities that control wireless, or yours may have a physical button that needs to be selected.

In addition, if you have never used your laptop on the URI network, you will be asked to download and install and electronic policy key. You probably don't want to do this during class time, so connect your laptop in your office first and get this step out of the way. To authenticate on the network, you will need to use your URI eCampus username and the password used for the Network and Sakai. If you do not know this password, please call the Help Desk at 874-4357.

Equipment

Overhead Projector

Overhead Projector

General Use To use an overhead projector:
1. Plug in the projector.
2. Select which bulb you wish to use (1 or 2).
3. Press the power on button.

The projector should now be illuminated and the fan should be running. Place your transparency on the projector and adjust the top mirror as necessary to get a clear image.

Bulb Switch There are two bulbs in each overhead projector. To switch between either, simply turn the projector off, then slide the designated lever (located on the front side) left or right. If the projector is left running while the switch is made, the risk of blowing a bulb is eminent.

Bulb Replacement 1. Be sure to unplug the projector from any outlet. Wait until it has been off for at least 5 minutes.
2. Unscrew the small flathead screw located on the front side of the projector.
3. Lift up the top half of the casing, and carefully unplug the broken bulb.
4. Insert a new bulb and replace the casing. Replace the screw.
Note: Be sure to plug the projector in before testing the new bulb(s).
Signs of a Broken Bulb

  • Cracked reflector casing.
  • Black burn marks on the casing or bulb.
  • Disconnected filament inside, makes a soft noise when rattled.

Security

Ask students waiting for the next class to remain outside the classroom until their instructor arrives. As the Instructor, you are responsible for the room's security during your class time, so please lock up the cabinet when finished.